PREPARING THE SURFACE
- Surface must be dustless and free from stickiness.
- Surface must be sheer before application of Rhino Tile Bonder.
- Surface must be scrabbled to use material on the Rhino Tile Bonder.
PROCESS OF MIXING
- Take a proper thing for mixing and add 6-7 liter water and 25 kg bag under continues mixing for soft and smooth mixing.
- Leave this mix material to augment for 5 minutes.
- For mixing the material use electrical mixer for better result.
- Mix as much quantity, which can be used within 2-3 hours.
- Spread mixing material to a thickness of 3-6 mm(approx) and comb with jagged trowel.
- Apply the limited paste which can be tiled within 10-15 mins.
- Check the substrate periodically and if a skin has formed than remove adhesive and apply a new layer otherwise continue tilling.
- Check periodically that good contacts is maintained with the back of each tile also check there are no leave behind tile while fitting the tile.
- Start filling joints only after one day using “Rhino Tile Bonder”.